Aluminum & Stainless Steel Round Tapered Solar Light Pole
- Model:
- Material 1:
- Material 2:
- Height:
- Min. Diameter:
- Max. Diameter:
- Wall Thickness:
- Wind Resistant:
- Warranty ：
- YLDG-SL
- 6061 6063 T6 Aluminum Alloy
- 201/304/316 Stainless Steel
- 3-12 Meters | 10-40 Feet
- 60MM | 2.36 Inches
- 255MM | 10 Inches
- 2.5-6.0MM | 0.1-0.25 Inches
- 180KM/H
- 10+ Years
Pole Specification
| MODEL | HEIGHT | TOP OD | BASE OD | ARM | THICK | DOOR HEIGHT | DOOR SIZE | BASE SIZE |
|---|---|---|---|---|---|---|---|---|
| YLDG-SL1 | 5000 | 80 | 152 | 1500 | 4.0 | 500 | 80x250 | 298x298x12 |
| YLDG-SL2 | 6000 | 80 | 152 | 1500 | 4.0 | 500 | 80x250 | 298x298x12 |
| YLDG-SL3 | 7000 | 80 | 166 | 1500 | 4.0 | 500 | 80x250 | 298x298x12 |
| YLDG-SL4 | 8000 | 80 | 180 | 1500 | 4.0 | 500 | 100x300 | 305x305x19 |
| YLDG-SL5 | 9000 | 80 | 180 | 1500 | 4.0 | 500 | 100x300 | 305x305x19 |
| YLDG-SL6 | 10000 | 80 | 200 | 1500 | 4.0 | 500 | 100x300 | 305x305x19 |
Base Specification
| MODEL | BASE OD | BASE SIZE | THICK | HOLE SPACING |
|---|---|---|---|---|
| YLDG-PB1 | 152 | 298x298 | 12 | 210x210 |
| YLDG-PB2 | 166 | 298 x298 | 12 | 210x210 |
| YLDG-PB3 | 180 | 305 x305 | 19 | 210x210 |
| YLDG-PB4 | 200 | 305 x308 | 19 | 210x210 |
Surface Treatments
Superior Anodized Finish
1 Process
Electrolytic oxidation creates a hard, porous aluminum oxide layer
Sealed with nickel acetate for maximum corrosion resistance
Thickness: 20–25µm (Class I per ASTM B580)
Color Options:
Natural silver
Black/gold/bronze (custom Pantone matches available)
Stainless steel look (specialty finish for Korzovo project)
2 Material & Structural Benefits
6063-T6 alloy
High strength-to-weight ratio
Salt spray resistance
2000+ hours (ASTM B117)
UV stability
Zero fading for 15+ years
Non-conductive surface
Safer near power lines
3. Premium Applications
Urban landmarks (parks, campuses)
Coastal/harsh environments
High-end architectural lighting
Powder coating is an excellent finishing method for aluminum light poles, offering durability, corrosion resistance, and aesthetic appeal.
Process
Application:
– Electrostatic spray guns charge the powder particles, which adhere to the grounded aluminum pole.
– Uniform coverage is critical, especially for complex shapes.
Curing:
– Heat in an oven (~350–400°F / 177–204°C) for 10–15 minutes.
– The powder melts and forms a smooth, hard finish.
Quality Control & Testing
– Adhesion Test: ASTM D3359 (cross-cut tape test).
– Thickness Check: 2–4 mils (50–100 microns) is typical for light poles.
– Salt Spray Test: ASTM B117 (500+ hours for industrial/marine environments).
– Impact Resistance: ASTM D2794 (ensures durability against physical damage).
Description
Product Description
- This lamp pole is equipped with solar panels, which is simple and stylish
- The whole is made of aluminum alloy or stainless steel surface spraying treatment
- Light source is LED module 60W/group can adjust the number of units according to road conditions
- Color temperature :3000K-5000K
- Color index :≥Ra70
- Protection level: IP67
